cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1081
Views
0
Helpful
3
Replies
Highlighted

Activate a call forward with a Third-party SIP Device or with a analog device

Hi,

In a CUCMv9, how i can activate a call forward (all, busy, no anwser...) with Third-party SIP Device or with a analog device connected to a fxs?

I want to activate a call forward like a Alcatel or Aastra PBX with a code.

For exemple, i pick up the phone, with the code *95 followed by the destination number and hangs up the phone. And use the #95 for désactivate this call forward.

It's possible?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Cisco Employee

No codes for 3rd party SIP phones, no way to do it. Or for that matter, not even for Cisco Phones, other than CFA.

Anything besides CFA needs to be done via CCMadmin or CCMuser for any kind of phone.

For FXS that's only doable if you're running SCCP

http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Cisco Employee

No codes for 3rd party SIP phones, no way to do it. Or for that matter, not even for Cisco Phones, other than CFA.

Anything besides CFA needs to be done via CCMadmin or CCMuser for any kind of phone.

For FXS that's only doable if you're running SCCP

http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

Highlighted

ok, thanks

Highlighted

Are there updates/enhancement in recent versions of CUCM to support Call forward by 3rd party? Could a 3rd party use SIP 302 to redirect the call in lieu of a CFA on the line in CUCM?