Adding a vic card on UC560...

[fdetoma]

Hi,

we have an UC560-BRI-K9 integrated router.

This UCME contain a two free vic slot.

For now we use only two integrated BRI ports but, if we installing other two VIC2-2BRI-NT/TE

to implement more external ISDN line, we need also other license for it?

Or we can proceed installing cards end reconfiguring dial peer directly...?

Thanks! 

[Brandon Buffin]

You can install the BRI card. No additional licensing required. The VIC2-2BRI-NT/TE is a supported card in an open VIC slot on the UC560. See the following link.

http://www.cisco.com/c/en/us/products/collateral/unified-communications/unity-express/data_sheet_c78-566250.html

Brandon

[fdetoma]

Ok,

thansk, we'll proceed with card installation.

thanks!