I am well familiar with Nortel systems and can collect traffic reports by trunk groups which indicate a peg count and total ccs for inbound and outbound calls as well as a peg count for the number of time the trunk route had all trunks busy, and the number of blocked call attempts due to the atb (all trunks busy) condition.
SO: How do you get the above information out of the CUCM Rls 10?
We have a PRI tieline between the Cisco and an Avaya Definity G3r with a total of 184 b-channels in the trunk route. We need to be able to quantify the usage levels on this trunk route, especially we need to be able to quantify the blockage.
Hopefully the information is available by the hour for each day of reporting.
Thanks,
