Pichan
The ATA 187 follows the same MAC address rules as the ATA 186 & 188
If the ATA 187 has an original MAC address :-
AAAA.BBBB.CCCC this is used for the 1st port
The 2nd port uses the following address
AABB.BBCC.CC01
So the rule is delete the first 2 numbers on the left and add 01 at the end
Another example would be:-
1st port 2222.3333.4444
2nd port 2233.3344.4401
In your config you need to register another MAC
voice register pool 1
id mac xxxx.xxxx.xx01
codec g711ulaw
number 1 dn 100
number 2 dn 101
Hope this helps
Regards,
Alex.
Please rate useful posts.
Regards,
Alex.
Please rate useful posts.