Hi Everyone,
CUCM version :11.5.1.su5
On cisco 2800 vg i have strange issue, incoming pstn calls has delay problem on h323 gateway .
Calling party hear voice 7-8 seconds later using with following mtp configuration. when i select following mtp resource on the gateway there are audio delay issue but i change 2900 series gateway resource there is no problem.
NAME: "PVDMII DSP SIMM with Two DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with Two DSPs"
PID: PVDM2-32 , VID: V01 , SN: FOC11073535
NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 5", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64 , VID: V01 , SN: FOC124534534
****The problem happen following 2811 vg resource*****
sccp local FastEthernet0/0
sccp ccm 192.48.77.20 identifier 1 version 5.0.1
sccp ccm 192.49.77.21 identifier 2 version 5.0.1
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 1 register XCODE_MERO
associate profile 3 register MTP_MERO
associate profile 2 register CFB_MERO
switchback method graceful
!
dspfarm profile 1 transcode
description XCODE_MERO
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec gsmfr
maximum sessions 2
associate application SCCP
!
dspfarm profile 2 conference
description CFB_MERO
codec g711ulaw
codec g711alaw
maximum sessions 7
associate application SCCP
!
dspfarm profile 3 mtp
description MTP_MERO
codec g711ulaw
maximum sessions software 500
associate application SCCP
******on 29021 vg resource there is no problem********
NAME: "PVDM3 DSP DIMM with 64 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 64 Channels"
PID: PVDM3-64 , VID: V01 , SN: FOC19159X31
NAME: "PVDM3 DSP DIMM with 64 Channels on Slot 0 SubSlot 5", DESCR: "PVDM3 DSP DIMM with 64 Channels"
PID: PVDM3-64 , VID: V01 , SN: FOC1837575V
NAME: "Services Module with Services Ready Engine on Slot 1", DESCR: "Services Module with Services Ready Engine"
PID: SM-SRE-710-K9 , VID: V01 , SN: FOC19177A9S
NAME: "C2921/C2951 AC Power Supply", DESCR: "C2921/C2951 AC Power Supply"
PID: PWR-2921-51-AC , VID: V03 , SN: QCS19070N69
sccp local GigabitEthernet0/0
sccp ccm 192.48.77.20 identifier 1 version 7.0
sccp ccm 192.49.77.21 identifier 2 version 7.0
sccp
!
sccp ccm group 1
bind interface GigabitEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 1 register CFB_CUBE
associate profile 2 register XCODE_CUBE
associate profile 3 register MTP_CUBE
!
dspfarm profile 2 transcode
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
codec g729r8
codec g729br8
maximum sessions 1
associate application SCCP
!
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 7
associate application SCCP
!
dspfarm profile 3 mtp
codec g711alaw
codec pass-through
maximum sessions hardware 10
maximum sessions software 200
associate application SCCP
Thanks advance...
