Auto Dial configuration

[Remon Adel]

Dear all
I want to know how can i configure analog phone register with cucm 6 to auto dial specific number when i take handset off

[Manish Gogna]

Hi,

Please check the following post

https://supportforums.cisco.com/discussion/11488721/config-hotline-fxs-cucm-mgcp

HTH

Manish

[Terry Cheema]

Refer to detailed instructions here: http://pandaeatsbamboo.blogspot.com.au/2008/03/configuring-plar-on-cucm.html