01-13-2012 07:59 AM - edited 03-16-2019 09:00 AM
My client has a CUCM 6 cluster with 500 phones configured for the auto reg pool (1000 - 1500). The pool has been exhausted - in that the highest number has been used (DN 1500). However, lower DN numbers have been freed up. It does not appear that the CUCM is rolling back to look for open numbers. Is this a bug? Is there a fix?
Jeff
Solved! Go to Solution.
01-13-2012 08:25 AM
CUCM only keeps 3 values related to auto-registration
Start DN, End DN and Next DN.
Next DN first value is StartDN-1 and it goes all the way until next NextDN = End DN, once that happens the pool is exhausted and you need to define a new range. It doesn't look to find whether you changed those DNs and now they're free or start over again.
If you need more devices to be auto-registered define a new range.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
01-13-2012 08:22 AM
Jeff,
Go to the
Call Roouting --> Route Plan Report
Drop down the left hand search to Unassigned DNs
Search for patterns begining with 1
If these are your AUTO REG Numbers the delete them.
Try AUTO REG a phone again
HTH
Alex
01-13-2012 08:25 AM
CUCM only keeps 3 values related to auto-registration
Start DN, End DN and Next DN.
Next DN first value is StartDN-1 and it goes all the way until next NextDN = End DN, once that happens the pool is exhausted and you need to define a new range. It doesn't look to find whether you changed those DNs and now they're free or start over again.
If you need more devices to be auto-registered define a new range.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide