05-01-2007 05:53 AM - edited 03-14-2019 09:15 PM
I want people calling a DN to be automatic forwarded to another DN at an specific preconfigured time of the day. Is this possible in this version?
Solved! Go to Solution.
05-01-2007 05:56 AM
Yes, you can do it using Time of the Day Routing which is available with CM 4.2. Check http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e483.html
So when you want the calls to be routed to another number at a pre-defined time, you should configure a Translation pattern which would be active at that time such that it changes the Called Number and therfore forwarding the call to a different number.
05-01-2007 05:56 AM
Yes, you can do it using Time of the Day Routing which is available with CM 4.2. Check http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e483.html
So when you want the calls to be routed to another number at a pre-defined time, you should configure a Translation pattern which would be active at that time such that it changes the Called Number and therfore forwarding the call to a different number.
05-01-2007 07:05 AM
Thank you so much.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide