cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
170
Views
0
Helpful
2
Replies

automatically changing the trunk

zeuscyril
Enthusiast
Enthusiast

hi friends,

i am having 2851 ccme and i am having 7 analog lines and one 30 channel PRI line

what i need is once the analog lines are used (full ) then automatically system has to select pri line to call outside

and i am using 9 to dial out.

i attaching my config in this

in my config there is two access one is 9(for analog line ) and 0 (for pri line)  and some direct numbers are there in PRI line.

thanks

cyril

2 REPLIES 2

You can use a trunk group with preference labels to create an ordered list of interfaces to use for the outbound calls. Each of the analog voice ports would be 1-9 and the PRI would be preference 10.

http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_t3.html#wp1622528

hi jonathan,

can you explain me with my config it is very helpful to me becuse i tried it , but i am getting confused.

thanks

cyril

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: