02-19-2014 10:18 PM - edited 03-16-2019 09:49 PM
Hi All,
We have deployed BE6K. Among the four Hard Disks installed on the Cisco UCS C 220 server one of them found to be defective and we removed it. Do we need to do configuration to replace the new Hard Disk ? Please Help.
Best regards
kennedy
02-20-2014 02:13 AM
HI Kennedy.
UCS C 220 Hard Drives are hot pluggable and no configuration should not needed.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220/install/C220/replace.html#wp1220308
HTH
Regards
Carlo
Please rate all helpful posts "The more you help the more you learn"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community