Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Dears, The flash memory we're seeing on C9200-48T & C9300-48U switch is lower than expected which is nearly 10.7 Gb but the expected one is16Gb and please clarify why is that happening. below is the show outputs to see the flash memory size. Ci...
Dear All, we've implemented FlexVPN network for organization with hundreds of branches with two hubs at head office and one at the DR sites and we're using BGP on all Hubs and Spokes. we've connected branches to the HQ hubs with client profile, what ...
Hi All, we've installed ISDN line on CME and incoming calls have no issues but all outgoing calls have continuous noisy (shhhhhhhhh) sound for inside callers but the called party (PSTN) clearly hears the callers voice. and in addition to that the ISD...
Dear All, we want to use cisco 2901 voice bundle router as a gateway for freepbx IP PBX. after creating SIP trunk between them, outgoing calls working but we're having issues on incoming calls are not reachable on freepbx extensions. after debugging ...
Dear All,
We've installed two Cisco 5508 WLCs from the AP side, we've 1552 & 1572 APs.
signal coverage for 1552 APs are very good but we couldn't get that kind of performance from 1572 APs.
we can't get a stable full signal within 10 - 30 meters fr...
we've one tunnel with client profile from branches to the HQ but planning to add a new tunnel with separate client profile from branches to the DR.what's the downside of having a separate tunnel to the DR and what's the preferred way to connect the D...
Thanks Rob for your fast response. the network is currently working with two of the hubs installed at the HQ and we want to add a new Hub at the DR.our concern is how can we connect DR hub (bgp) to the HQ Hubs (bgp), for DR to Branches connectivity w...
Hi Muhamad, I tried to make both outgoing and incoming calls to and from pstn but i got nothing on the debugs, on every call trial the FXO ports goes busy. Apologies for not attaching the notepad (The contents of the attachment doesn't match its file...
Hi Muhamad, Also you cannot make incoming call or call receive and you cannot pickup? Yes, Ican't VOIP-R#show voice port summaryIN OUTPORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC=============== == ============ ===== ==== ======== ======== ==0/0/0 --...
