BLF cisco 7821

[cemil.heyderov]

Hi dear friends

i configure BLF on cucm. when Phone B busy on Phone A Flash red, it is ok. but i want to configure that when anybody call Phone B BLF flashing.Sorry my english.

[Mohammed al Baqari]

Hi,

You need to add BLF to all phones pointing to phone B through BAT. There is
no global setting to allow it AFAIK.

**** please remember to rate useful posts

[cemil.heyderov]

if it is possible send link for solution

[Roger Kallberg]

How to setup BLF is described in this document.