07-09-2007 10:52 PM - edited 03-14-2019 10:28 PM
Does Callmanager have a feature to block malicious calls,based on the calling number? If the answer is yes, how can I do the settings?
09-13-2007 10:58 AM
If you want to block DNIS, it is easily done from the CallManager:
Create a Route Pattern that matches what DNIS you want to block, then set it to "Block this Pattern".
09-13-2007 11:00 AM
Yes, that I know. However I want to block an outbound call originating on the H.323 gateway....bypassing the call manager completely.
09-13-2007 11:19 AM
Yes, you can still do that. You just need to apply the "call-block" to the inbound dial-peer, not your outbound peer:
voice translation-rule 101
rule 1 reject /9xxxxxxxxxx/
voice translation-profile TEST-BLOCK
translate called 101
dial-peer voice 1000 voip
call-block translation-profile incoming TEST-BLOCK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide