ā04-03-2013 10:31 PM - edited ā03-16-2019 04:36 PM
Hi
I have MCS server 7816I5 , i have iso image for 8.6.2.22900 , i want to boot ISO on the MCS server by USB/external hard disk becasue the image size is exceeded 4.48 and the DVD size is 4.35 so i cant copy the image on DVD
so there is way to solve this issue , or workaround ?
Note : i got this iso image from cisco , it is authorized and it is recommended
Solved! Go to Solution.
ā04-08-2013 09:19 AM
Have you tried copying the ISO image to a dual layer DVD? Dual layer DVDs can be up to 8.5GB. The DVD drive on the 7815 should be able to read this with no problem.
HTH. Barry Hesk
Intrinsic Network Solutions.
ā04-04-2013 01:35 AM
Hi,
I think the exact server model is MCS 7816-I5-K9-CMD2.
You can open a TAC case with Cisco .Cisco will open SR with IBM and take help from IBM so as to avoid any violation of warranty issues.
regds,
aman
ā04-04-2013 01:38 AM
Hi,
is this image bootable ? if you download it from download software page it is not bootable.
HTH
Anas
please don't forget to rate the helpful posts
ā04-08-2013 08:12 AM
Dear Anas
it is bootable image i got it directly from cisco
how to solve this issue ?
ā04-08-2013 09:19 AM
Have you tried copying the ISO image to a dual layer DVD? Dual layer DVDs can be up to 8.5GB. The DVD drive on the 7815 should be able to read this with no problem.
HTH. Barry Hesk
Intrinsic Network Solutions.
ā04-09-2013 01:56 AM
Dear barry
it is done and thanks a lot
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide