03-15-2017 06:51 PM - edited 03-17-2019 09:49 AM
Hi
I exported Enteprise Parameters from CUCM 8.6 and CUCM 10.5 by bulk admin tool.
Then, CacheControl is changed from F(8.6) to T(10.5).
I investigated it by Google, but I couldn't get it. I want to know what CacheControl parameter is.
Solved! Go to Solution.
03-17-2017 09:19 AM
I don't see a "CacheControl" enterprise parameter in 10.5 -- at least not what's visible in ccmadmin. It's likely that the bat export outputs the parameter name from the db which seems to line up with the "Enable Caching" parameter name as seen from ccmadmin. In ccmadmin, each parameter name is a link which opens a popup window with details about each parameter. That should be your first stop vs google when looking into any enterprise/service parameter.
03-17-2017 09:19 AM
I don't see a "CacheControl" enterprise parameter in 10.5 -- at least not what's visible in ccmadmin. It's likely that the bat export outputs the parameter name from the db which seems to line up with the "Enable Caching" parameter name as seen from ccmadmin. In ccmadmin, each parameter name is a link which opens a popup window with details about each parameter. That should be your first stop vs google when looking into any enterprise/service parameter.
03-20-2017 05:02 PM
Hi, Will
Thank you for your replying.
I found it in the address bar of the popup window!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide