08-17-2007 05:26 AM - edited 03-14-2019 11:07 PM
We have a cisco call manager express running version 3.3 and using the analogue port on this to connect to a fax machine. When we send a fax for one page this sends perfect but anymore than 2 pages then only the first and maybe the second pages goes through, not the whole fax. If we patch this fax machine from the call manager express and to an analogue line that does not go through the cisco express then this actually works perfectly.
we have the following in the analogue port setup
!
voice-port 0/1/0
cptone GB
station-id name "Fax1"
station-id number 8901
08-23-2007 08:25 AM
It oculd be a problem with fax settings.
08-23-2007 01:30 PM
Hi,
I agree it could be a fax setting issue, most modern day faxes support "Behind PBX" and "ECM" settings.
Ensure the the behind pbx is enabled and ECM is disabled.
Cheers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide