04-03-2013 04:38 PM - edited 03-16-2019 04:35 PM
Greetings
I have a 1861 router with cme 7.1 (I think, I got this from the show telephony-services) and when I try to add a new phone 6961, I dont have that type in the cme.
Is this something about the compatibility of the cme-ip phone or am I missing some configuration?
Thank you
Solved! Go to Solution.
04-03-2013 05:09 PM
Augusto,
Support for the 6961 starts at CME version 8.0 for SCCP and 9.0 for SIP
See the CME software compatability matrix
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Regards,
Alex.
Please rate useful posts.
04-03-2013 05:09 PM
Augusto,
Support for the 6961 starts at CME version 8.0 for SCCP and 9.0 for SIP
See the CME software compatability matrix
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Regards,
Alex.
Please rate useful posts.
04-04-2013 11:44 AM
Thank you
In order to get the CME 8.5 I should do an upgrade of the router IOS right?
04-04-2013 03:36 PM
Yes.
Regards,
- Adrian.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide