Call to FXO

[Jonn cos]

Hi all,

I have FXO and FXS ports. On FXO, i have configured PLAR that points to phone connected to my analog phone (on FSX). When i call to my pstn number (connected to FXO) from my cell, it first accepts the call, then redirects the call to analog phone and it start ringing, but the problem is, if i disconnect the call from my cell number, analog phone still rings continously.

Kindly tell me what is the issue and how to solve it

[paolo bevilacqua · Accepted solution]

This is often asked, had you searched before asking:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

You can also configure 'plar opx' to prevent the problem.