Call transfer problem with cisco voip gateway

[Criss Sawyer]

hi,

In my environement, i have CCM 7.0 and 2 gatways h323 3825 and 2811 (all within same Vlan). the 2 gateways are configured the same way but the call transfer works fine with the 3825 gateway but it does not with the 2811 one.

any ideas?

[markbatts]

Do you have MTP checked on both gateways?

Mark

[Criss Sawyer]

thx you for your reply

I check MTP on both gateways, it worked.

the weird thing is that the transfer worked fine with the 3825 gateway without checking this parameter.

[markbatts · Accepted solution]

Please rate succesful answers

Cheers

Mark