callerID on inbound calls via T1 PRI (PSTN)

[p.holley]

Hi,

When receiving inbound calls to the CME 4.2 system, the calling number displays on the IP Phone, but also displaying are a bunch of characters that are not readable.

How do i get rid of these characters?

Thanks

[paolo bevilacqua]

See this thread:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf6386

The bug ID is not known, however there are few ones that have a strong resemblance to that.

Hope this helps, please rate post if it does!