Solved: calling party transformation configuration

O.Zang · ‎09-16-2018

Hi Expert,

I am wondering if it is possible to configure a tranformation as explained below.

USER A's DN is 500 and it's PSTN number is 20430000. I want know if it is possible to configure a transformation so that if USER B ( DN 501) rather than dialing the DN ( 500) dial the pstn number 20430000, would the CUCM call the DN 500 directly or would it send the call to the telco ?

Thanks in advance

Zanga

Chris Deren · ‎09-16-2018

You can definitely do this, it's called "forced on-net dialing" and all you would need is a translation pattern such as "20430000" or to capture more sequential numbers something like "204300XX" in partition reachable from the calling phones, which translates the called number to for example 5XX, with CSS applied to this translation that has access to the 3 digit phone DNs.

View solution in original post

Jaime Valencia · ‎09-16-2018

Either option is possible, it comes down to what you configure.

HTH

java

if this helps, please rate

jonathan.salter · ‎09-16-2018

You could also use an Alternate Number configuration under the DN configurations.

Please remember to rate useful posts, click on the stars below.

Chris Deren · ‎09-16-2018

You can definitely do this, it's called "forced on-net dialing" and all you would need is a translation pattern such as "20430000" or to capture more sequential numbers something like "204300XX" in partition reachable from the calling phones, which translates the called number to for example 5XX, with CSS applied to this translation that has access to the 3 digit phone DNs.

O.Zang · ‎09-19-2018

thank you for your help Chris.

Zanga