05-10-2012 07:44 AM - edited 03-16-2019 11:05 AM
I have a SIP trunk. In the Inbound Calls -> Connected Party Settings section, I have a CSS selected. The "Use Device Pool Connected Party Transformation CSS" tick box is UNticked.
I have a Calling Party Transformation Pattern (44.XXXXXXXXXX) which does a discard PreDot and a Prefix Digit "0".
This pattern is in a partition that is in the above Connected Party Transformation CSS.
Yet, the calling party isn't being transformed from 44.XXXXXXXXXX to 0.XXXXXXXXXX
I've done a very similar thing for ISDN gateways, which seems to work fine.
What am I missing to get this to work ?
Thanks,
GTG
05-10-2012 09:31 AM
Hi Gordon
Firstly congratulations on your spotlight award
What are you seeng as the CLI for the incomming call.
Regards,
Alex.
05-11-2012 08:21 AM
acampbell wrote:
Firstly congratulations on your spotlight award
Thank you !
What are you seeng as the CLI for the incomming call.
Wireshark is showing the DN as 44XXXXXXXXXX
GTG
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide