ccm 11.0 upgrade not enough space issue

[osw200051]

Hi All,

I try to upgrade ccm 11.0.1.20000 to 11.0.1.22900

But failed and the failed message is not enough space.

I try to load "ciscocm.free_common_space_v1.3.k3.cop" to ccm successfully.

Then try upgrade process to 11.0.1.22900 still failed, not enough message still present.

Does anyone help for me?

Thanks all

[Aseem Anand]

Hi,

You need to free up some space by adjusting the low and high watermark to 10 & 20.

Follow the steps suggested in the document below:

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/200581-Procedure-to-Adjust-WaterMark-in-RTMT-of.html#anc6

PS note: Change it back to the default values once you are done upgrading.

Aseem

(Please rate if useful)

[osw200051]

Thanks Aseem,

The problem was solved after your advise.