Hello
I have just set up a test environment with a CCM 5.1 and 3 IP phones (1x7960 + 2x7970).
Got everything working just fine, but there is one thing I can't seem to get to work. All of the 3 phones have attached the 7914 Expansion Module. When user 1 dials user 2, and user 2's telephone is ringing, the led for user 2 on the 7914 on user 3, does not flash. When user 2 answers the phone, the led on user 3's 7914 starts to illuminate constant red.
The buttons on the 7914's are configured as "Speed dial BLF".
On CCM 4.2, the LED would flash red on user 3's 7914, when user 2's telephone was ringing.
does anyone have a solution ?
Best Regards
R. Andersen