07-29-2009 06:57 PM - edited 03-15-2019 07:08 PM
Currently have a 2811 running CCME 4.0 and would like to interface with an Ericsson MD110 using E1 QSIG. Does anyone have an example that I could start looking at.
Solved! Go to Solution.
07-30-2009 01:35 PM
This happens all the time.
Once you become familiar with the meaning of "debug isdn q931" you're able to adapt to almost any situation.
Please remember to rate useful posts with the scrollbox below!
07-30-2009 01:21 PM
Just set switch type and you will be working. Then for additional features, see case by case.
Would be worth to update CCME because 4.0 is old already.
07-30-2009 01:27 PM
Thanks. I was trying to support some team members in a less perfect environment. My config was good but they were given incorrect telephone access #s and only partial E1 trunk access.
07-30-2009 01:35 PM
This happens all the time.
Once you become familiar with the meaning of "debug isdn q931" you're able to adapt to almost any situation.
Please remember to rate useful posts with the scrollbox below!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide