Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
How do I check to see the available space on my v7.1 MoH servers for WAV file uploads and translations?
Hello All,I have 7941 and 7942 Phones deployed in my network. I just want to ask what will be the implication of configuring some phones to with SCCP protocols while others run SIP protocols?Thank you for your response.
Dear ,I have CME 8.1 and CUCM 6.1, I define the CME as H.323 VG on the CUCM, and I configure a Voip dial-peer to point to CUCM.When I make a call from CME to CUCM the names of the users of CME appears to the phones registered with CUCM, but the names...
All,I have once Cisco 7962 IP phone that is showing the incorrect time however the date is correct. I have verified the phone is in the correct device pool and ensured the the NTP servers are listed for each site correctly. I reset the phone multip...
when you have UnityConnection and users in seperate Search spaces how do you get the MWI to light for those users who are not in the default search space (on CUC) the MWI on/off DN is in a partition the VM ports can reach but if I have two users say...
Hi,Here's a scenario of what we have been experiencing:User1 and User2 shares a line.1. CallerA calls User1 and ask her to transfer to a mobile number.2. User1 press [Transfer] button and try to key in a mobile number.3. While User1 is inputting the ...
Hi,I have been configuring CCME with 2821 router that are connected with 10 PSTN lines. When i make any call to any of these lines and hang up the connection, the phone continue to ring for sometime may be for 30 secs, then stops. The line i made the...
Hi Expert,I've the below setup, CUE integration with UCM. User are prompted to enter the ID prior to enter password.Understand that this is due to CUE can't recognize the calling#. Internal DN is 4 digit while EPNM is setto E164 with "+".I've configu...
Hi experts, Right now i am using CUPS 7.0.6.10000-17 and i want to upgrade to 8.X....but i dont find right IOS image in cisco software downloads....On cisco site i can find upgrade 7.x to 7.x(X) and 8.x to 8.x(X)...but not upgrade file...
Running CME 8.0 with PRI.Wireless callers' name is always "WIRELESS CALLERS".Is it possible to manipulate incoming callerid name to something else?
Hello friends, I wonder if is it possible and how can I do to activate 802.1X on Wireless Ip Phones. Iḿ using and ACS, and I'm successfully authenticating desktops. But I don't know if is it possible to do it with wireless phones. Thanks in advance....
We are running CM 7.13. I want to upload an audio file to one of our MOH servers. Will I need to reboot this server, or restart the IP Voice Media Streaming App? Also, after I upload the audio file and change the User/Network Hold MOH Audio Source...
Hi there !I need help on this...Scenario:- I have the AC software installed. This AC can control Cisco Phones without problem.- The CUCM7.1.3 is integrated with Philips PBX using MGCP.- PSTN is connected to the Philips PBX- PSTN--->PBX--->GW2821-->CU...
Hello,Can someone tell me what service on CUCM the corp directory uses? Additionally, what port(s) do the phones use to talk to CUCM on for the directory? I have a customer where their directories (personal and Corp) recently stopped working and I...
Here is the scenerio. We just replaced a Nortel System, running on a Bell Canada PRI to a CMBE running on an Alstream PRI.All is well, except the outbound calls have no name associated with them. Everything I have read indicates that the name comes f...
