Change Language to Arabic CallManager Express

[moussa.malqui1]

Hi All,

I use CME Version 15.5(1) T2. I uploaded file language po-locale-ar_MA-k3-10.3.2.1000-1.cop.sgn in
Flash: from TFTP server, after I type "user-locale 1 u1 load
po-locale-ar_MA-k3-10.3.2.1000-1.cop.sgn" i had this problem "% Invalid input detected at '^'
marker" the marker is under 1. where is the problem ?

Thank you in advance 

Regards,

[Nadeem Ahmed]

Moussa,

seems like you are using the wrong locale file for CME. it suppose to be .tar file not cop.sgn

Download the correct locale from cisco.com for CME

http://www.cisco.com/cgi-bin/tablebuild.pl/CME-Locale

upload the file using TFTP to flash:

Extract the .tar to flash

Under the telephony-service

user-locale 1 ===

network locale

no create

create cnf

Please use this reference link how to upload and run locale on CME

https://supportforums.cisco.com/discussion/10821846/how-chargue-locales

Br,

Nadeem

PS: PLease rate all useful post.

[moussa.malqui1]

thank you Nadeem

[Rajan]

Hi Moussa,

COP.sgn is for CUCM. you need to download the locale files for CME from the below link and uncompress the files. Then copy that to the flash and use the same.

https://software.cisco.com/download/release.html?mdfid=277641082&softwareid=282897001&release=10.5&relind=AVAILABLE&rellifecycle=&reltype=latest

HTH

Rajan

[moussa.malqui1]

thank you rajan