02-01-2018 03:58 AM - edited 03-17-2019 12:06 PM
Hi,
Is there any link (tabular sheets ) available to choose the right ucs for the exterprise.
( to understand before reaching partners ) .
Purpose cluster cucm 1500 users
expressway and c cluster
cup cluster
Thanks
02-01-2018 06:48 AM
No, you need to do the math of required resources and then look at TRCs/3rd party HW that meet/exceed those.
If you have access to the virtual machine placement tool, it can provide some recommendations after doing the same math you'd do manually.
02-01-2018 07:07 AM
TRCs are on the Cisco Doc Wiki. Java is our course right but you can also review the SRND for design help. If you are above 1250 users the recommendation is dedicated TFTP server and dedicated publisher. You can use the VMPT to size out your OVAs. Also if this is not something you do normally you can always engage with your account manager or rope in a cisco partner to assist with the sizing and implementation.
02-01-2018 12:18 PM
Hi,
There was a tabular sheet explains the about the ova and cpu memory and all ,
I have searched all over :) .Did not find out
Please help to locate
Thanks
02-01-2018 06:25 PM
The read me of the OVA will tell you the system requirements, the vmpt you can use for sizing as well, however I would advise engaging with your cisco account manager or a UC Master cisco partner to ensure you are sizing everything correctly.
02-01-2018 09:08 PM
02-02-2018 05:00 AM
That is for CUCM you can see OVA sizes, but once again there is more to it than just that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide