Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
i need to know if cisco cme 2921 version 10.5 support feature of Jabber or not !! i really need this information
Hi Guys, I bought 135 Enh plus licnese which should support 270 devices, but when I installed it in CUCM 10.5 the call manager consumed them as 135 not as 270! How can I solve this issue. Thanks for all Mohammad
Dear Team, I would like to update new MOH given by Management so please help me to accomplish this task. I uploaded same and i tried to do test on exist phone but it did not work. I an confused because, when New MOH uploaded so it's sequence is 3 a...
Before I go too wild deploying these phones, I know that I will need a steady supply of USB-C cables to replace ones that will "Disappear" over time for use in other devices. But, my question is, will plugging a USB-C device (e.g. Cell Phone, Laptop...
We have the 5 buttons on the right side of the screen of our receptionist's 8851 programmed for speed dial/transfer for certain important extensions. However, when she answers a call, the answered call dialog obscures the on-screen labels for those ...
Hi , IF we have expressway C and E and two devices A and B outside the campus , From A does it go through the complete path like expressway - e and c and go to the client outside B ? If not how do we verify that . Thanks
Hi, I have issue on SIP Trunk Call Problem. For outgoing call, I can call easily, but for Incoming call from my phone to IP Phone, it's always failed. From the debug I knew the dial peer is failed, but I don't know on what's dial peer that error. I...
I have a series of IP phones to convert from multiplatform to ENTERPRISE. The classic upgrade procedure from MPP to CUCM seems to be not the correct one. Are there any indications on how to make the firmware change?
Team, I am currently working on a project where i have to upload TP multiple times. When i try to upload the TP using BAT , it is only accepting tar file with name "translationpattern". But second time i cannot upload with the same name;it would ov...
Hello Guys, I am new to voice, basically a routing switching guy. I have a phone that has Dedicated DID 877 from PRI and a dedicated voice mail number 800xxxxxxx from carrier. We have main phone which is 872. Issue is when I call 877 phone from m...
Hi everyone, today i discover a strange behavior in phones 78XX, 88XX and DX650. i have CUBE to ITSP, and CUC integrates with SIP to CUCM. when i call from PSTN to a any extension with or without voicemail, when i press the "decline Button" phone s...
Hi, If I want use cube functionality , the SP has to support VOIP ? Let's say I have remote site , can reach service provider network , Cube will help? Thanks
hello I have a series of ip phones to be converted from MPP to ENTERPRISE. The classic firmware upgrade procedure is not the correct one, and the Uprade Enterprise Enable entry is missing from the provisioning page. Is there an alternative procedure?
Hi, We got an cisco 7942 phone(using sip firmware) trying to register with asterix phone system, but it says unprovisioned. could anyone help. Thanks
If the device CSS is used when making calls and the specific forwarding CSS is used when forwarding calls. What is the directory number CSS used for?
