Cisco 1760 Flash

[bndbrennan]

Hello,

I would like to load some backgrouds to our 1760 for use by the 7970 IP Phone.

I know I need to add a folder with the images and xml file.

However, looking at the current flash of our router, we do not have folders/subdir for anything. How do you add one?

Router is running CME 4.0

Thanks.

[Chris Deren · Accepted solution]

See the following similar thread:

https://supportforums.cisco.com/message/1152720#1152720

and the following tech note on image specs:

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/products_tech_note09186a008062495a.shtml

HTH, please rate all helpful posts!

Chris

[bndbrennan]

Thank You.

So, now that I have all the images and XML in the root of the flash. I should be able to use the alias command, to make this work?

"Place all the files in the root directory and use the TFTP alias statement to create the illusion of the correct structure.

For example;

tftp-server flash:/7971-ColourBG.png alias Desktops/320x212x12/7971-ColourBG.png"