Cisco 2911K9 ISR router Ip phone licensing

[angelo castro]

Hi

We have Basic Cisco 2911k9 and we don't know if still need to purchase IP Phone LIcense 

for Cisco IP Phone 7975 x 3

Cisco IP Phone 6921 x 12

Cisco jabber x 5

IP Communicator x 5

attached the 2911k9 show version and show license

regards,

Angelo 

[Aman Soi]

Hi Angelo,

Please refer the link which says

Lifetime RTU

A Lifetime RTU release license includes the following:

1. Initial evaluation period of 60 days

2. Transition to Lifetime RTU license without customer intervention

RTU transition warning/complete Syslogs/Traps are provided 10 days and 5 days before transition and on the actual day of transition.

Customers running the following Lifetime RTU releases are not impacted:

• 15.0(1)M6 or later
• 15.1(1)T4 or later
• 15.1(2)T4 or later
• 15.1(3)T2 or later
• 15.1(4)M1 or later
• 15.2(1)T or later

http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html#38592

This license is for Unified communications /Voice.

But u need to have licenses for IP phones.I suppose u are going to use CME /SRST.

for that u need to have  phone licenses for number of phones to be used along with feature license.

regds,

aman

[angelo castro]

Hi Aman,

Thanks for your reply.

So you mean that the 2911k9 we have don't have any license for IP Phone?

And another thing is what are this for?

Index: 6        Feature: cme-srst                          Version: 1.0
        License Type: RightToUse
        License State: Active, In Use
        License Count: 60/0  (In-use/Violation)
        License Priority: Low
        Store Index: 7

Index 10 Feature: cme-srst
        Period left: Life time
        License Type: RightToUse
        License State: Active, In Use
        License Count: 60/0  (In-use/Violation)
        License Priority: Low

Is this the same with the phone licenses you referring or different?

Regards,

Angelo

[Aman Soi · Accepted solution]

Hi Angelo,

All the licneses are paper /honour based.Yo need to order them for any audit purpose.

refer the link

https://supportforums.cisco.com/discussion/11876826/how-can-i-know-how-many-phone-license-i-have

Same is for ISR G2 as well.

You can also refer the attachment on faq .

regds,

aman