Hi Cisco Support Forum,
I hope one of you guys can help, I have configured some 7821 IP phones with CME 10.0 and Unity Express 8.6
I can get the phone to register using the 6921 pool-type. When I press the messages button nothing happens. Is anyone else having the same issue? Am I missing some config from the phone. Any help would be Great.
voice register pool-type 7821
xml-config maxNumCalls 2
xml-config busyTrigger 2
phoneload-support
num-lines 2
description Cisco SIP Phone 7821
reference-pooltype 6921
!
voice register pool-type 8831
description Cisco SIP Phone 8831
reference-pooltype 6921
!
voice register global
mode cme
source-address 192.168.211.254 port 5060
max-dn 120
max-pool 42
load 7821 sip78xx.10-1-1SR1-4
load 8831 sip8831.9-3-3-5
authenticate realm cisco.com
timezone 22
tftp-path flash:
create profile sync 0005304496066208
!
voice register dn 1
number 801
name 801
label 801
!
voice register dn 2
number 802
name 802
label 802
!
!
voice register pool 1
busy-trigger-per-button 1
id mac 5067.AE21.832A
type 7821
number 1 dn 1
number 2 dn 2
presence call-list
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
voice register pool-type 7821
xml-config maxNumCalls 2
xml-config busyTrigger 2
phoneload-support
num-lines 2
description Cisco SIP Phone 7821
reference-pooltype 6921
!
voice register pool-type 8831
description Cisco SIP Phone 8831
reference-pooltype 6921
!
voice register global
mode cme
source-address 192.168.211.254 port 5060
max-dn 120
max-pool 42
load 7821 sip78xx.10-1-1SR1-4
load 8831 sip8831.9-3-3-5
authenticate realm cisco.com
timezone 22
tftp-path flash:
create profile sync 0005304496066208
!
voice register dn 1
number 801
name 801
label 801
!
voice register dn 2
number 802
name 802
label 802
!
!
voice register pool 1
busy-trigger-per-button 1
id mac 5067.AE21.832A
type 7821
number 1 dn 1
number 2 dn 2
presence call-list
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
