08-12-2013 03:46 PM - edited 03-16-2019 06:49 PM
Hello ,,
After configuring VoWLAN as per the following document:
Voice over Wireless LAN 4.1 Design Guide
and adding a network profile on the 7925g wireless phone . I still get connection failed .
For those who had faced this issue before please comment any propable troubleshoot for this .
This issue is delaying a project delivery, so its urgent
Thanks all
08-13-2013 05:18 AM
Describe your WLAN configurations and settings.
What is the error message when the phone tries to connect?
08-13-2013 10:41 PM
Hi,
Further to what Leo has said:
What model of the 7925G are you using specifically? eg. CP-7925G-A-K9, CP-7925G-W-K9, CP-7925G-E-K9 etc
What country is the phone being deployed into?
if it is a W model, the AP will need world mode configured on the Dot11Radio interface to register with the network.
conf t
int Dot11Radio1
world-mode dot11d country XX (both, indoor, outdoor)
end.
It sounds like an identical issue I dealt with last week, and this solved the issue. Also check obviously the phone has the correct SSID (case sensitive) and password, as well as security mode.
HTH,
Nic.
09-13-2013 12:03 AM
Thanks Nic. The command fixed my issue.
09-13-2013 02:47 AM
You're welcome, glad I could help.
03-06-2014 01:06 AM
Hi Nic,
How can I configure interface dot11 on lightweight access point??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide