Hello My name is Eddie and I work for ArrowS3.
I was given a Cisco 7942g running SIP software with the goal of connecting this phone to a Samsung Communcation Manager VoIP system.
The issue I am having is that we need the phone to register at firstname.lastname@example.org, and use the outbound proxy 192.168.100.10 via UDP.
I was able to change the XML file to use UDP with some online research, but when I set the callmanagergroup proxy to dallas.com, the phone tries to register to email@example.com <-- public of real www.dallas.com.
I need the phone to try and register via outbound proxy first, then use firstname.lastname@example.org
I attached the XML I am using
Thanks for the help
That is not the correct information.
This should be your CUCM IP address.
If you have proxy then how come the details are NOT here?
Where are the details of the phone's username and password?
I am not connecting to a CUCM, my VoIP system requires that you connect @domainname
I added my proxy address, but still did not register (192.168.100.10)
Username = 701021
Password = 0000
While running wireshark,
I can see the phone trying to register to email@example.com
The phone is doing a DNS Lookup on dallas.com, is it possible to disable this?
I am able to configure this on any polycom SIP phone.
Ok, so you want the phone to directly register with your voice service provider (VSP).
Can you verify with your VSP if they recommend you ENABLE/DISABLE NAT? How about ALG?
Try sticking the SCM IP address here. CP phones don't like anything with letters in them. They want IP address.
Another thing, your SEPmacaddress.cnf.xml file has a lot of stuff missing. Go here: http://www.dalrae.com.au/users/aalex/SEPmacaddress.cnf.xml
I do see I was missing some options but still not luck using your config.
I do see when the CP phone talking to my PBX when I use the IP in
Hope thats not too smail
have you found a solution for the described problem?
I have an similiar problem: My SIP provider only accepts registrations with "phonenumer@dnsname" but my phone registers with "phonenumber@ipaddress"
The DNS lookup cannot be disabled because it is needed to contact the external SIP server, but the phone should register with @dnsname and not with the IP address.
Is there a command or anything to configure this within the conf file?