Cisco ASA 5510 Duplicate hosts/NAT

[galaga]

Hello,

I have a Cisco ASA 5510 Version 9.1(7)9 with multiple tunnels, (2) of which have duplicate hosts. These 2 tunnels are completely separate no communication between the two. The Chicago tunnel was just added and appears to be having issues with 105.180.90.16 passing traffic.

Can I have duplicate hosts like this  ? dev1 and Chicago-local share a local IP too 192.168.68.58

nat (INSIDE,OUTSIDE) source static dev1 dev1-Global destination static kansas kansas

object-group network kansas
network-object 105.180.90.16 255.255.255.255

object-group network Chicago-remote
network-object 105.180.90.16 255.255.255.255

nat (INSIDE,OUTSIDE) source static Chicago-local Chicago-local destination static Chicago-remote Chicago-remote no-proxy-arp route-lookup

[Ratheesh Kumar]

Hi there

I wish you could post this under the Network or Security section as this is for IP Telephony.

https://supportforums.cisco.com/t5/network-infrastructure/ct-p/4461-network-infrastructure

https://supportforums.cisco.com/t5/security/ct-p/4561-security

Hope this helps!

Cheers
Rath!

***Please rate helpful posts***

[galaga]

I posted in the appropriate forum, how can I delete this post ?

[Ratheesh Kumar]

As I responded, you might lose that option to delete it. The only time a post can be deleted by a member is if no one else has responded to the discussion.  In order to delete a discussion that has responses you need to submit a request to supportforums-info@cisco.com.  

Hope this helps!

Cheers
Rath!

***Please rate helpful posts***