galaga

galaga · 11-08-2018

Ok thanks

galaga · 11-08-2018

Hello, Is there a guide for converting IOS commands to IOS XE ? mls qos map cos-dscp mls qos srr-que...

galaga · 11-08-2018

What MTU adjustments were made ?

galaga · 11-07-2018

Hello, On destination, on spanning session open on source none for show queuing interface Eth1/49 sa...

galaga · 11-07-2018

here is some of the wireshark output, not a big wireshark guy Windows file size on is small (on dest...

galaga · 11-01-2018

What could be the difference in windows size value ? copy to windows size value 11595 source length ...

galaga · 10-31-2018

Yes reverse direction works good trace route is 8 hops same each way

galaga · 10-30-2018

Slow server 2008 to server 2012 copy,copies time out copies from 2012 to 2008 are fine both server a...

galaga · 09-21-2018

Could you walk my through the L3 connection, config ?

galaga · 09-20-2018

What are your thoughts on adding object tracking ? What about configuring the (2) keep alives ?

galaga · 09-20-2018

NK2 Legend: (*) - local vPC is down, forwarding via vPC peer-link vPC domain id : 1Peer status : pee...

galaga · 09-20-2018

NK1 Legend: (*) - local vPC is down, forwarding via vPC peer-link vPC domain id : 1Peer status : pee...

galaga · 09-20-2018

By homing, you mean configuring the WAN as you stated ? NK2 did not kick in, by say that, I assume i...

galaga · 09-20-2018

In our case turns out management interface was down, we experienced Cisco Bug: CSCus68610 on 5K1, wh...

galaga · 09-20-2018

In our case turns out management interface was down, we experienced Cisco Bug: CSCus68610 on 5K1, wh...

Re: Slow server to server copy