Cisco ATA-191 trying to access SNMP settings

[hankej]

I am trying to get to the SNMP settings on an ATA-191.  I guess I can turn on SNMP according to this documentation:  https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/19x/3PCC/english/admin-guide/at9x_b_ata191-192-admin-mp/at9x_b_ata191-192-admin-mp_chapter_0100.html#reference_935BD7DC8596F47091E19D0057009FA9

I finally was able to get into the web interface of the device which was another long problem.  But when looking at the web interface, I don't see anywhere to modify settings.  Am I looking in the wrong place?

Thank you

[Nithin Eluvathingal · Accepted solution]

The link which you shared is for Multiplatform firmware. are you using Multiplatform firmware ?

For sip firmware I don't see any SNMP option in the document.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190.html

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/191/english/admin-guide/at91_b_ata191-admin-guide.html 

[mcaldogne]

Is there any possibility to set SNMP on SIP ATA190/191 registered to CUCM?

Thanks

Mirko