I am trying to connect my Cisco 2911 with CallManager Express to Office 365 Unified Messaging for Auto Attendant and voicemail. I have followed what settings I found per Microsofts knowledgebase but all I get when I dial the pilot number is a fast busy. I have 8961 and 7945G phones setup as SIP and a 7937 setup as SCCP. Calling internally and calling out works fine. I just can't connect to UM. I have attached a running-config, debug ccsip messages, and debug voip ccapi inout logs. In speaking with Office 365 tech support the best they could give me was that it needed to be TLS on port 5061 and using g711.
Is there a way in UCCE with using an admin script maybe using the email application in Call Studio to send out an email? I know in UCCX you can send out an email if the script were to fail but is there a way to do it in UCCE? Any help would be great!
Fun lab with Packet Tracer and running Cisco CME with 3 ip phones, 3 laptops, 1 switch, and 1 router. Fun lab with repetition. You will be able to test your phones and laptop for connectivity etc. Solution;see attached CME Packet Tracer L...
How to configure IP Address for Cisco Integrated Management Controller CIMC. The Cisco Unified Computing System (UCS) is a data center product composed of computing hardware, virtualization support, switching fabric, and management software.