Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello, i am looking for configuration guide such as, call-pickup,call forward,transfer, conference, etc,etc when VG in in SRST mode (mgcp fallback)can anybody route me to configuration guidethanks
Dear Sirs,I am fresh in Cisco Telephony system (CME). We install the CME 9.1 with MeetMe conference session. Also we have live record button for recording conversation to our mailbox. However, we found that live recording button is not support in Mee...
We are running CCM 5.1.3. I have a TAC case open on this, and I have a work around, but I wanted to see if anyone else was having this problem.We are not using G.722 in our network, even though we have the phones to support it, because it is not sup...
Hi,Is there some sort of rule of thumb to follow when working out how many phones you will be able to power on a switch? e.g If I have a stack of 4 x 3750X how do you work out available power for phones? Does it make a difference if the switches run...
Hi ,when i´m dialing with the DNA / Phones the call is routed ( result is ok.)but when i´m dialing on the device ( the same phone es in DNA) i get fast busy ????
hi, i am about to perform a migration of CM 8.0 from an old MCS server to a UCS server. i tried this in the past where i used one of the CM ova files for the new virtual machine. i don't remember exactly which one, i may have been the 2500 ova, but...
I am running a CUCM10.5 with 8851 model phones, along with older 7961 phones.We are LDAP integrated for directory, using 4 digit internally with LDAP phone number listed 10 digit.I created a translation pattern stripping 6 digits and calling from the...
Hello everyone;I have a cisco 3745 voice gateway already configured and working.I want to modify the configuration for one directory number ( for example replacing 1000 by 2000).what are the modification that must be done, using witch commands.N.B ...
Hello folks,Is there a way to get the Cisco IP phone uptime from the IP phone Web Interface (or whatever interface apart from remote CGI control) ?(like the info shown on the TUI with Settings > Status > Network Statistics) Thank you.
Hello, I want to reduce delay timer in our voice Gateway as we do not need to wait for 3 rings to hear auto-attendant voice mail when we call our office numbers from outside. Instead, I would like to immediately start auto-attendant voice mail as...
Hi all, I can't receive any fax on only one DID. I have one 2901 on MGCP with e1In my case this DID is for a FAX, there is my debug isdn q931 when I try to send a FAX *Dec 4 21:46:39.214: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x6532 ...
IP Communicator on Microsoft Surface. Under Prefacence, Network options , to include tftp server is Grayed out. any idea's to why or how to work around?
Hi, i have a VXML Server and the last saturday on the IVR i have listening a record in english. I have restarted the server and all work normally. I have checked the error logs, i have found the next:12/13/2014 14:23:15.698, SERVER ERROR: An error oc...
CISCO VoIP System Info:Cisco Unity Connection version: 8.6.2ES25.21900-25CM Admin System version: 8.6.2.21900-5 on C200M2 Servers We recently changed our backup process from a local SFTP server, to on going over our WAN. Works fine in CM, however, i...
Bug ID: CSCup28852 Recent installation of CUCM 10.5 and using the multi-server multi-SAN certificate causes the Callmanager process to send group phone resets every 7 to 10 minutes. The phone symptoms will show ITL updates during this time causing a ...
