08-10-2020 01:10 PM
Is it possible to use free pbx or astrix as a voicemail service instead of cisco unity or unity express
08-11-2020 11:43 AM
Hi,
According to the datasheet you can set up CME with a third-party voice mail
Voicemail features | ● Integrated voicemail and Automated-Attendant solution with Cisco Unity Express ● Integration with Cisco Unity Voicemail and Cisco Unity unified messaging, or third-party voicemail integration (H.323, SIP, or dual-tone multifrequency [DTMF]) |
Regards
Leonardo Santana
08-11-2020 12:04 PM
would anyone know how to set that up by any chance im very new to all this
08-11-2020 12:04 PM
im a student trying to learn
08-11-2020 12:10 PM
What do you have in mind?
If you have already the third-party voice mail check the documentation to see what type of integrations they support.
Regards
Leonardo Santana
08-11-2020 01:31 PM
using freepbx for voice mail
08-11-2020 01:48 PM
Look at Freepbx forum that is lot of stuff there
I found this doc too:
This post will show you my sample configuration for CME Router and FreePBX as voicemail server. The freePBX is used as voicemail because is an open source and alternative to Cisco Unity Express.
https://ciscocollaborationnotes.wordpress.com/2016/03/30/freepbx-voicemail/
Regards
Leonardo Santana
08-11-2020 01:58 PM
Thank you I will try getting it to work
08-11-2020 02:54 PM
that guide did not work sadly
08-11-2020 05:04 PM - edited 08-11-2020 05:05 PM
Hi,
Review your CME config and try to set up the freepbx according to the documentation.
Regards
Leonardo Santana
08-11-2020 06:09 PM
I did the only thing i could not do is the message waiting due to i cant seem to find the file vm.sh it does not exist and i cant call the exension i assigned it 1139 and when i do the debug command it tries to call 1139 locally even though i created a dial-peer pointing it at the free pbx it ignores the dial peer
08-12-2020 07:17 AM
Hi,
Try to understand the dial-peers logic, review your dial plan configuration.
About the voicemail you need to look at freepbx documentation.
Regards
Leonardo Santana
08-12-2020 11:08 AM
I did it like this destination-pattern 1139 the extension of voicemail i want to use on free pbx
dial-peer voice 1139 voip
description FreePBX
destination-pattern 1139
session protocol sipv2
session target ipv4:192.168.40.206
dtmf-relay rtp-nte
no vad
04-10-2024 06:28 PM
I got this to work with FreePBX ver 16.0.40.7 and Cisco CME ver 8.6. Here are my dialpeers:
dial-peer voice 1070 voip
description **TO FREEPBX**
destination-pattern 107.
session protocol sipv2
session target ipv4:172.24.0.68
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 1071 voip
description **FROM FREEPBX**
translation-profile incoming FreePBX
session protocol sipv2
session target ipv4:172.24.0.161
incoming called-number 910[0-3].
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 1072 voip
description **CALL FWD BUSY NOAN**
translation-profile outgoing VM_FORWARD
destination-pattern 50010..$
session protocol sipv2
session target ipv4:172.24.0.68
dtmf-relay rtp-nte
codec g711ulaw
no vad
Have fun!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide