Cisco IP DECT DBS-110 Compatible with Cisco ISR 4331 router

[azeemhb]

Hi,

Could you please help, The Cisco IP DECT DBS-110 wireless base station can be configured with a Cisco ISR 4331 router (Call Manager Express), Whether, the 4431 router is compatible with the IP DECT 6825 or not.

In our setup, we are planning to use  // Wireless phone (IP DECT 6825) --> Wireless Base station (Cisco IP DECT DBS-110) --> CME Router (ISR 4331) //

Base station - 110 Single-Cell Base Station
Handset or phone - 6825 Handset
CME Router - Cisco ISR4331

Could you please help whether  these combination can be done without any issue.

Thanks 

Mohamed Azeem 

[b.winter]

Check out the compatibility notes:
https://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-express/products-device-support-tables-list.html

[Roger Kallberg]

That model of phone is meant for Webex Calling. It can be used in CM, but then it would be added as a 3:rd party advanced SIP device. As this is from what I know not a viable option in CME this device type cannot be used on that platform.

[azeemhb]

From what I understand the device is a wireless base station that is compatible with the call manager and can be added as a 3rd party SIP (Advanced). Can you please check if this device can be added as a 3rd party (Advanced) similarly in CME? 

I have found below "ISR router 4331" commands to add the 3rd party device on CME 

voice register pool  1
id mac 0000.0000.0001          [[I have provided a dummy Mac-id]]
number 1 dn 1
username 82011000 password 82011000

Kindly confirm, Thanks