Solved: No, not in the lab and not in

DOUGLAS DRURY · ‎01-22-2015

Hi,

Just a quick question. I my lab I have CUCM 8.6 I also have a Cisco UC520, Is it possible to configure the UC520 as a MGCP gateway to allow UCM to make call over the ISDN line?

Thanks

Jaime Valencia · ‎01-22-2015

No, not in the lab and not in a production environment, that product was sold as an SMB call control agent/VM box, not as a GW for CUCM under any protocol, if any, and still not supported for production environment, you could try SIP/H323, since you'll never find that scenario in real life, I'd suggest you get an ISR.

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎01-22-2015

No, not in the lab and not in a production environment, that product was sold as an SMB call control agent/VM box, not as a GW for CUCM under any protocol, if any, and still not supported for production environment, you could try SIP/H323, since you'll never find that scenario in real life, I'd suggest you get an ISR.

HTH

java

if this helps, please rate

Cisco uc520 as MGCP gateway