cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
223
Views
0
Helpful
2
Replies
Sumit Bhargava
Beginner

Cisco Unified Business Edition 6k ver 9.1 integration with Nortel CS1k

Customer's Current Site: It has Nortel CS1k

New Site: Factored Cisco Unifed Business Edition 6K ver9.1 with HA

Cisco Unifed Business Edition 6K ver9.1 has to be integrated with Nortel CS1k. Like to understand how this integration would take place?

  1. Do we need to setup a normal IP Trunk between the two from Business Edition

  2. Does the integration require a SIP Trunk with CUBE license on Cisco Voice Gateway

Also, like to know if Automatic Failover is supported from Business Edition 6k ver9.1 between two business Edition Servers in HA mode running CUCM and Unity Connection

Thanks

Sumit

2 REPLIES 2

The link below details the integration.

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/1206769.pdf

You can read more about load balancing and design consideration on your business edition here

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/9x/callpros.html#wp1159144

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts
Jaime Valencia
Hall of Fame Cisco Employee

No, no trunks or anything are required (unless you're building two separate 6K clusters, then yes)

Phones will failover as in any other deployment, if you configure a PUB and a SUB.

Are you familiar with the 6K??

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Content for Community-Ad

Spotlight Awards 2021