Hi All,
we’ve installed FreePBX with Cisco voice gateway (ISR 2901-V) and we’re able to make and accept PSTN calls but when the calls got terminated from pstn callers, the sessions keep active on the freepbx soft phones side. It makes the FXO lines on the Cisco gateway off-hook until the agent ends the call from freepbx side. please advise how to make freepbx soft phones close the pstn call sessions automatically when the call got terminated from the pstn side.
In addition to that when pstn calls arrived on the Cisco gateway, it sends it to the freepbx and if there is no one to answer, the call is not getting terminated by the Cisco voice gateway (ISR 2901-V). please advise
regards
