03-19-2012 07:09 PM - edited 03-16-2019 10:12 AM
Hi All,
A very quick question.
Inbound calls via a Telco into a Voice Gateway which terminate on a Cisco 7941G.
Is it possible for a 7941 or other Cisco IP handsets to instagate Hookflash while the call is active, to then cause the PSTN line to provide new dialtone and then via DTMF from the IP handset instagate a Telco based transfer to another number.
This function was working on a Ericcson PABX previously!
Is hookflask an Analogue supported feature ONLY?
I believe CME supports it, has anyone got this working on CallManager?
Regards
Andrew
Solved! Go to Solution.
03-19-2012 09:12 PM
Correct Andrew, Hookflash on IP Phone is supported only with CME not with CUCM.
HTH
GP.
Pls rate helpful posts !!
03-19-2012 09:12 PM
Correct Andrew, Hookflash on IP Phone is supported only with CME not with CUCM.
HTH
GP.
Pls rate helpful posts !!
03-19-2012 10:25 PM
Thank you for your quick reply
03-19-2012 10:29 PM
You are welcome my friend.
Pls remember to rate the post if it helped. You can do so by clicking on the stars below every post.
Cheers !!
GP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide