cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
3269
Views
0
Helpful
13
Replies
cjrchoi11
Beginner

CIUS on CUCM 8.5.1.11900

Hi,

As per Cius data sheet, it supports on CUCM8.5.1 and 8.6 but I cannot find a device option "Cisco Cius" on CUCM8.5.1 even I installed Cius COP file.

How to configure Cius device on CUCM8.5.1.11900 (unrestricted)?

Thanks in advance,

1 ACCEPTED SOLUTION

Accepted Solutions
Vipul Jindal
Cisco Employee

you need to install the latest device pack as well. you can find the device pack on the cisco.com.

thanks,

Vipul jindal

View solution in original post

13 REPLIES 13
Jaime Valencia
Hall of Fame Cisco Employee

Have you done a cluster reboot after installing the cop file?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

You don't need to do a cluster reboot after installing the cop file, just restart the TFTP service on all servers running this service in the cluster. Once complete the CIUS should appear in the device drop-down list.

Vipul Jindal
Cisco Employee

you need to install the latest device pack as well. you can find the device pack on the cisco.com.

thanks,

Vipul jindal

Thanks Vipul, resolved by installing latest device pack.

Guys,

I have a Cius and trying to connect to UCM. Where is best place to find installation guide?

UCM is 7.13, but i understand minimum version is 7.15?

What are the settings for registering within the UCM?

Any help much appreciated.

Jaime Valencia
Hall of Fame Cisco Employee

The way to configure the CIUS is exactly the same as any other phone.

Add new phone -> CIUS -> MAC address and your regular settings (DP, security mode, etc) then add the DN.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Use the Ethernet MAC not the wireless MAC, regardless of your connection media. The CIUS uses the Ethernet MAC during registration.