I have an office with a 2911 router, POTS lines terminate on FXO ports used for inbound/outbound PSTN calls. Customer is requesting that call outbound calls display his main listed number. Inbound caller-ID displays correctly on the Cisco 7975 phones. The service provider can only block caller ID on the backlines for outoing calls, or can only display the CLID from each line, they cannot provide the CLID of the main number for all outgoing calls. The customer also thinks that the lines were displaying the main number before the router was power-cycled. Outbound calls round-robin, and even if I change the calls to always try the first FXO port wit the main line attached, if that line is busy calls will eventually route out the other backlines.
There are no other possibilities to display one outgoing number with POTS lines correct? For now there is no current option to change his service to PRI.
we have recently announced a new Webex Events service with a best-in-class virtual event experience that is video-centric, intelligent, and simple to use.
Some highlights (features of new Webex Events that were not there with existing/c...
The purpose of this document is to present the different troubleshooting steps to take when some service from the Cisco IM & Presence Service Server have not started gracefully.
The States of a service
The IM&P ...
This event had place on Tuesday 20th, April 2021 at 10hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees learned how to use ...
(view in My Videos)
Community Live- Tour of the Real-Time Monitoring Tool
(Live event - Tuesday, 20 April, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event had place on Tuesday 20th, April 2021 at 10:00 hrs PDT
What is th...
Hello Admin Community!
I’m recruiting participants for an upcoming study looking at large meeting troubleshooting in Control Hub. If you’d like to participate, please fill out this quick, 2 min. survey. Thanks! https://www.surveymonkey.com/r/...