cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
794
Views
1
Helpful
4
Replies

CME 11.5 SIP 8841 Registration issue

netgn
Level 1
Level 1

Config below, simple setup following guide from Cisco here 

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmebasic.html#concept_A2BD5A1412FA4256A7059097E08CBD03

On how to auto-register SIP Based phones.  We have a bunch of these 8841's we want to be able to auto register and test before we ship out into the field and have this spare router to do so.  However, I must be missing something here because the phones won't register at all and I keep getting the below errors.  Any idea on this one?  

 

May 22 17:16:57.362 PDT: VOICE_REG_POOL: No entry for (AUTO-REG) found in contact table
May 22 17:16:57.366 PDT: VOICE_REG_POOL: No entry for (AUTO-REG) found in contact table
May 22 17:16:57.370 PDT: VOICE_REG_POOL: No entry for (AUTO-REG) found in contact table
May 22 17:16:57.378 PDT: VOICE_REG_POOL: No entry for (AUTO-REG) found in contact table
May 22 17:16:57.398 PDT: VOICE_REG_POOL: No entry for (AUTO-REG) found in contact table
May 22 17:16:57.398 PDT: voice_reg_get_reg_expires_timer: no voice register pool found
May 22 17:16:57.398 PDT: VOICE_REG_POOL: Register request for (AUTO-REG) from (172.30.10.3)
May 22 17:16:57.398 PDT: VOICE_REG_POOL: Auto Registration request from Name:xxx IP:172.30.10.3
May 22 17:16:57.398 PDT: VOICE_REG_POOL: Auto-register: DN tag not found
May 22 17:16:57.398 PDT: VOICE_REG_POOL: No entry for (AUTO-REG) found in contact table
May 22 17:16:57.398 PDT: voice_reg_get_phone_index_from_contact: No contact list
May 22 17:16:57.402 PDT: VOICE_REG_POOL: No entry for (AUTO-REG) found in contact table

 

=========== configuration


Current configuration : 5158 bytes
!
!
version 15.6
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
no service password-encryption
!
hostname xxx
!
boot-start-marker
boot system flash:c2900-universalk9-mz.SPA.156-3.M5.bin
boot-end-marker
!
!
logging buffered 128000
!
no aaa new-model
clock timezone PST -8 0
clock summer-time PDT recurring
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!


!
ip dhcp excluded-address 172.30.10.250 172.30.10.254
ip dhcp excluded-address 172.30.35.250 172.30.35.254
!
ip dhcp pool voice
network 172.30.10.0 255.255.255.0
default-router 172.30.10.254
dns-server 8.8.8.8
option 150 ip 172.30.10.254
!
!
ip cef
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
!
voice-card 0
!
!
!
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface GigabitEthernet0/0.200
bind media source-interface GigabitEthernet0/0.200
registrar server
midcall-signaling passthru media-change
!
!
!
!
voice register global
mode cme
create profile sync xxx
auto-register
password xxx
auto-assign 1 to 100
template 10
!
!
!
!
!
!
vxml logging-tag
license udi pid xxx sn xxx
hw-module pvdm 0/0
!
!
!
file privilege 0
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description Uplink 3560-24 Port 23
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/0.10
description Management
encapsulation dot1Q 10
ip address 10.10.10.14 255.255.255.0
!
interface GigabitEthernet0/0.200
description Voice Network
encapsulation dot1Q 200
ip address 172.30.10.254 255.255.255.0
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
duplex auto
speed auto
!
!
ip forward-protocol nd
!
ip http server
ip http authentication local
ip http secure-server
!
ip tftp source-interface GigabitEthernet0/0.200
ip dns server
ip route 0.0.0.0 0.0.0.0 10.10.10.1
ip ssh version 2
ip scp server enable
!
ipv6 ioam timestamp
!
!
snmp-server packetsize 1024
tftp-server flash1:SCCP45.9-4-2SR3-1S.loads
tftp-server flash1:term45.default.loads
tftp-server flash1:term65.default.loads
tftp-server flash1:cnu45.9-4-2ES26.sbn
tftp-server flash1:apps45.9-4-2ES26.sbn
tftp-server flash1:dsp45.9-4-2ES26.sbn
tftp-server flash1:jar45sccp.9-4-2ES26.sbn
tftp-server flash1:cvm45sccp.9-4-2ES26.sbn
tftp-server flash1:term11.default.loads
tftp-server flash1:term06.default.loads
tftp-server flash1:SCCP11.9-4-2SR3-1S.loads
tftp-server flash1:jar11sccp.9-4-2ES26.sbn
tftp-server flash1:dsp11.9-4-2ES26.sbn
tftp-server flash1:cvm11sccp.9-4-2ES26.sbn
tftp-server flash1:cnu11.9-4-2ES26.sbn
tftp-server flash1:apps11.9-4-2ES26.sbn
tftp-server flash:sb288xx.BE-01-026.sbn
tftp-server flash:sb2288xx.BE-01-013.sbn
tftp-server flash:sip88xx.12-5-1SR3-74.loads
tftp-server flash:ssb288xx.BE-01-007.sbn
tftp-server flash:vc488xx.12-5-1SR3-74.sbn
tftp-server flash:boot1288xx.BE-01-007.sbn
tftp-server flash:fbi88xx.BE-01-012.sbn
tftp-server flash:kern88xx.12-5-1SR3-74.sbn
tftp-server flash:kern288xx.12-5-1SR3-74.sbn
tftp-server flash:m0patch288xx.BE-01-001.sbn
tftp-server flash:rootfs288xx.12-5-1SR3-74.sbn
tftp-server flash:rootfs88xx.12-5-1SR3-74.sbn
!
control-plane
!
!
!
!
!
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
!
!
!
!
gateway
timer receive-rtp 1200
!
sip-ua
retry register 10
!
!
!
gatekeeper
shutdown
!
!
telephony-service
max-ephones 110
max-dn 400
ip source-address 172.30.10.254 port 2000
auto assign 1 to 100
max-conferences 8 gain -6
web admin system name xxx password xxx
transfer-system full-consult
create cnf-files version-stamp 7960 May 22 2023 17:01:17
!

 

2 Accepted Solutions

Accepted Solutions

I dont see the below configured under your voice register global.

           max-dn 
	  max-pool 


Response Signature


View solution in original post

M02@rt37
VIP
VIP

Hello @netgn,

Where are your voice register dn and pool?

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

View solution in original post

4 Replies 4

I dont see the below configured under your voice register global.

           max-dn 
	  max-pool 


Response Signature


Sorry for delay in responding, yes this solved it thank you!!

Great news! Happy for you!

You're so welcome @netgn 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

M02@rt37
VIP
VIP

Hello @netgn,

Where are your voice register dn and pool?

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.