01-17-2018 03:40 AM - edited 03-17-2019 11:58 AM
Guys,
I am relativity new to CME (I am studying for my CICD) so please forgive me if I am missing somthing obvious.
Line button 1 DN 2 is showing as down, I am assuming its something to do with this ??
ephone-2 Mac:001E.BE90.79B9 TCP socket:[4] activeLine:0 REGISTERED in SCCP ver 4
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:10.192.229.21 51483 Telecaster 7960 sub=3 keepalive 3052 max_line 20
button 1: dn 2 number 114 CH1 DOWN CH2 DOWN
button 2: dn 25 number 1000 CH1 IDLE CH2 IDLE shared
button 3: dn 26 number 1001 CH1 CONNECTED CH2 IDLE shared
button 7: dn 12 number 122 CH1 DOWN CH2 DOWN monitor-ring
button 8: dn 13 number 123 CH1 DOWN CH2 DOWN monitor-ring
button 9: dn 3 number 113 CH1 DOWN CH2 DOWN monitor-ring
button 10: dn 6 number 116 CH1 IDLE CH2 IDLE monitor-ring shared
button 11: dn 7 number 117 CH1 DOWN CH2 DOWN monitor-ring
button 12: dn 8 number 118 CH1 IDLE CH2 IDLE monitor-ring shared
button 13: dn 9 number 119 CH1 IDLE CH2 IDLE monitor-ring shared
button 14: dn 10 number 120 CH1 DOWN CH2 DOWN monitor-ring
button 15: dn 11 number 121 CH1 DOWN CH2 DOWN monitor-ring
button 16: dn 5 number 115 CH1 IDLE CH2 IDLE monitor-ring shared
button 17: dn 4 number 112 CH1 IDLE CH2 IDLE monitor-ring shared
button 18: dn 1 number 111 CH1 IDLE CH2 IDLE monitor-ring shared
I have restarted the phone but still the same issue
is there anything else I should try ?
Solved! Go to Solution.
01-19-2018 01:51 AM
01-17-2018 04:03 AM
Can you attach, as file, you CME configuration:
sh run | sec telephony|ephone
01-19-2018 01:51 AM
HI I managed to resole this by restarting the CME!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide