01-02-2013 10:17 AM - edited 03-16-2019 02:57 PM
Hello all,
when i am trying to create a second conference session , " Unable to create conference " ===>. (telephony, conference hardware )
When i am using the software conference , i am able to create multiple conference .
Conferencing Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 192.168.5.1, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 3
Reported Max Streams: 40, Reported Max OOS Streams: 0
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: g729br8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30
TLS : ENABLED
Transcoding Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 192.168.5.1, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 1
Reported Max Streams: 12, Reported Max OOS Streams: 0
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30
ephone-dn 18 octo-line
number A001
conference ad-hoc
preference 1
no huntstop
ephone-dn 19 octo-line
number A001
conference ad-hoc
no huntstop
ephone-dn 20 octo-line
number A001
conference ad-hoc
preference 2
ephone-dn 21 octo-line
number 500
conference meetme unlocked
no huntstop
dspfarm profile 1 transcode
codec g729r8
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 6
associate application SCCP
dspfarm profile 3 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 5
01-02-2013 10:46 AM
Adeep,
Post your full config. Can you also explain better...What do you mean a second conference session? Do you mean you already have a conference ongoing? How many people were on that conference? Or do you mean you cant add another person to the conference
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
01-02-2013 11:01 AM
I am trying to create a second conference...but am getting the " Unable to create conference " error message in the phone.. the conference which i created have three members ...
01-02-2013 11:24 AM
Can you post a full config or atleat the telephony-service portion.
Yosh
01-03-2013 05:55 AM
telephony-service
sdspfarm units 10
sdspfarm transcode sessions 25
sdspfarm tag 1 confprof1
sdspfarm tag 2 Transcoder
sdspfarm tag 3 CSE_CONF
no auto-reg-ephone
fxo hook-flash
max-ephones 50
max-dn 300
ip source-address 192.168.5.1 port 2000
service phone webAccess 0
service phone ehookEnable 1
timeouts interdigit 4
system message Computer Solutions East, Inc.
url services
http://192.168.15.2/voiceview/common/login.do
url authentication
http://192.168.15.1/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7942 SCCP42.9-1-1SR1S.loads
load 7962 SCCP42.9-1-1SR1S.loads
load 7970 SCCP70.9-2-1S.loads
load 7975 SCCP75.9-3-1-1S.loads
load 6941 SCCP69xx.9-2-2-6.loads
time-zone 12
date-format dd-mm-yy
live-record 400
voicemail 399
max-conferences 8 gain -6
hunt-group logout HLog
moh "flash:/MusicOnWaiting.wav"
multicast moh 239.1.1.1 port 16384
web admin system name cseadmin secret 5 $1$yPsl$IOp4k9/Gy/U5v72LVjrmy.
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
01-03-2013 06:02 AM
Adeep,
Is this a meetme or ad-hoc conference?
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
01-03-2013 06:05 AM
Meetme ..But i cant add the command hardware conference ...when i add the hardware conference , only one conferece is allowed in the entire system , te second conferece session will give the error "Unable to create conference"...
01-03-2013 06:21 AM
This looks like you do not have enough dsp to configure more than one hardware conference session.
You may need to add more dsp to your router. If you send a show diag and a sh run of your gateway, we can tell how many dsp you have and advise further. Hardware conferencing supports a mix of G729 and G711 codec hence requires more DSP
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide